Abstract: The anisotropy of fracture properties at different bedding orientations of lignite plays an important role in controlling the formation of fracture network of reservoir racturing. The static fracture behavior of the lignite semi-circular bending specimens of the 6 coal group in the Shengli coalfield, Inner Mongolia, is studied. The results show that: ① Bedding When the angleθis 90°, 60°, 45°, 30° and divider, the mode I fracture toughnessK_IC of lignite of Shengli coalfield is 0.045, 0.058, 0.073, 0.084 and 0.096 MPa·m^0.5, respectively. on the whole, the fracture toughness of the sample with the notch-cut layered surface is much higher than that of the notch-parallel bedding-surface sample, and for the notch-parallel bedding-surface sample, the There is an increasing trend with decreasing fracture toughness, and the fracture properties of lignite in the study area have strong anisotropic characteristics; ② The displacement-load curves shows that the fracture process of the five lignite semi-circular bending samples under three-point bending loading includes: the compaction stage of pores and cracks, the linear elastic compression deformation energy storage stage, the critical fracture failure stage, and the load unloading stage after fracture. The large stage, and the rapid load unloading of the above samples in the later stage of fracture indicates that the material fracture forms are brittle fractures, the coal has a large fracture rate, and the reservoir is suitable for large-scale volume fracturing; ③ The fracture energyΓof five kinds of lignite semi-circular bending samples with the bedding angleθis 90°, 60°, 45°, 30° and dividing during three-point bending loading process is 64.38, 80.49, 112.50, 146.66, and 355.00 J/m², respectively. The fracture energy of the sample with the notch-cut layered surface in the whole process is much larger than that of the lignite sample of the incision-parallel bedding plane. Under the same conditions, the energy consumption of fracturing along the bedding direction of the split lignite is high, and the expansion scale of the fracturing fracture is limited; ④ Under three-point bending loading, the fractures of the lignite semi-circular bending specimens in the study area mainly include tensile fractures and shear fractures. The fracture path of the lignite specimens is controlled by the spatial relations between the external loading direction and the orientation of the coal bedding plane When the bedding angleθis between 45° and 60°, the degree of tortuosity of the fracture of the sample is the highest, and the fracture network is most likely to be formed in the coal reservoir fracturing; ⑤ Based on the fracture mechanics anisotropy of lignite, this paper believes that horizontal wells + staged fracturing in lignite reservoirs can greatly improve the complexity of fracturing fractures. In addition, considering the inertia of particles, the horizontal wells with the borehole direction parallel to the maximum horizontal principal stress can carry proppant smoothly and avoid plugging, and the fracture filling effect is better. The above understanding is expected to provide a certain scientific reference for the reservoir volume fracturing stimulation and fracturing network construction in the study area.