Abstract:
Utilizing solid waste steel slag (SS) to prepare backfill materials and sequester CO
2 is an effective pathway for SS resource recovery and carbon emission reduction. However, the low reactivity of SS limits the efficiency of direct carbonation for CO
2 sequestration, and the formation of products such as calcium carbonate during carbonation deteriorates the rheological properties of the filling slurry, restricting its long-distance pipeline transportation. To enhance CO
2 sequestration efficiency and improve slurry rheology, acetic acid (AA) was introduced as a modifier. The AA-modified steel slag backfill slurry (ASS) at various AA dosages was characterized using rheometry, thermogravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM) to investigate the regulatory effects and mechanisms on the rheological behavior and CO
2 sequestration performance of ASS. The results show that AA reacts with SS to form products such as calcium acetate that attach to SS particle surfaces, simultaneously creating in-situ pores. Moreover, the addition of AA enhances grinding efficiency, promotes the reduction of SS particle size, and increases the specific surface area, thereby exposing more active sites for reaction with CO
2 and improving the CO
2 sequestration capacity. At an AA dosage of 2%, the CO
2 sequestration capacity reaches its optimum, with a sequestration mass fraction of 1.94%. AA and the resulting calcium acetate attach to the surfaces of ASS particles, providing lubrication and dispersion effects that improve the rheological properties of the slurry. At an AA dosage of 4%, the yield stress of ASS decreases to a minimum of 12.53 Pa, achieving the optimal rheological performance. However, excessive AA addition generates excessive calcium acetate that coats SS particles, hindering the contact between CO
2 and active sites and thus reducing the chemical CO
2 sequestration. Meanwhile, the substantial increase in specific surface area enhances the water absorption of SS, reducing the free water that serves as a lubricant between particles and degrading the rheological properties.