高级检索

形状效应下大倾角伪俯斜工作面顶板破断特征

Roof fracture characteristics under shape effects in steeply dipping pseudo-inclined working face

  • 摘要: 工作面伪俯斜布置可有效改善煤壁受载状态、提升装备与围岩的稳定性,现已在大倾角、急倾斜长壁工作面广泛应用。虽然伪俯斜技术可通过调整工作面空间布置来降低工作面实际倾角,但同时也改变了工作面空间形态,顶板破断受工作面几何形态(推进度与伪斜角)显著影响,即“形状效应”。以四川绿水洞煤矿3222工作面为工程背景,采用物理相似模拟、数值模拟与理论分析相结合的方法,系统研究了不同推进度与伪斜角下采场顶板的应力演化、位移分布及破断特征,基于薄板理论建立了平行四边形顶板力学模型。结果表明:工作面围岩应力沿倾向呈非对称拱壳状分布,顶板应力表现为“上大下小”特征,卸压范围随层位升高而减小;倾斜中上部基本顶变形最大且率先破断,破断具有明显的非对称性与时序性,破断轮廓呈非对称倾斜“O”形。形状效应显著控制顶板变形,推进度与顶板挠度呈正比;伪斜角与最大挠度呈反比,但伪斜角过大会因板长增加导致挠度回升。边界条件由四边固支转为三边固支一边简支后,挠度值显著增大,变形破坏区域向简支边偏移。平行四边形板的弯矩与主应力集中分布于两长边及中部,主应力对称线沿伪斜方向,长边区域首先发生拉伸断裂。基于上述机理,提出了伪斜角与推进度协同优化、非对称分区支护及采空区主动干预等控制措施。

     

    Abstract: The pseudo-inclined layout can effectively improve the load-bearing state of the coal wall and enhance the stability of both equipment and surrounding rock. This technique has now been widely adopted in steeply dipping working faces. Although the pseudo-inclined technique reduces the actual dip angle by adjusting the spatial arrangement of the face, it simultaneously alters the face geometry. As a result, roof failure is significantly influenced by the advance distance and the pseudo-inclined angle. Based on the engineering background of No.3222 working face in the Lüshuidong Coal Mine, Sichuan Province, a combined approach of physical similarity simulation, numerical simulation, and theoretical analysis was adopted to systematically investigate the stress evolution, displacement distribution, and fracture characteristics of the stope roof under different advance distances and pseudo-inclined angles. A mechanical model of the parallelogram roof was established based on thin-plate theory. The results show that the surrounding rock stress in the working face presents an asymmetric arch-shell distribution along the dip direction, with roof stress characterized by larger magnitudes in the upper part and smaller magnitudes in the lower part. The range of stress release decreases as the roof horizon rises. The deformation of the main roof is most pronounced in the middle-upper portion along the dip, where failure initiates first, exhibiting clear asymmetry and a time-sequenced pattern. The fracture contour takes the form of an asymmetric inclined “O” shape. The shape effect substantially controls roof deformation: the advance distance is proportional to roof deflection, while the pseudo-inclined angle is inversely proportional to the maximum deflection. However, an excessively large pseudo-inclined angle may lead to a rebound in deflection due to the increased length of the plate. When the boundary condition changes from four clamped edges to three clamped edges and one simply supported edge, deflection increases markedly, and the zone of deformation and failure shifts toward the simply supported edge. The bending moment and principal stress of the parallelogram plate are concentrated along the two long edges and the middle region, with the principal stress symmetry line aligned with the pseudo-inclined direction. Tensile fracture first occurs in the long-edge region. Based on the above mechanisms, control measures are proposed, including synergetic optimization of the pseudo-inclined angle and advance distance, asymmetric zonal support, and active goaf intervention.

     

/

返回文章
返回