Abstract:
The sealing section of gas drainage boreholes is prone to incomplete sealing of peripheral fractures due to the shrinkage and cracking characteristics of cement-based sealing materials, allowing mine air to enter the boreholes. Stress redistribution induced by adjacent pressure relief drilling promotes the evolution of fracture aperture and roughness in the sealing section, thereby altering the coal permeability and affecting the sealing effectiveness of drainage boreholes. To investigate the permeability characteristics of the fractured coal mass in the sealing section under the influence of pressure relief drilling, fracture specimens with different roughness levels were fabricated using 3D printing technology, and variable confining pressure seepage tests were conducted. The seepage characteristics of fractures with varying roughness were analyzed, the evolution mechanism of seepage paths during aperture changes was discussed, and an equivalent hydraulic aperture model considering the coupling effect of confining pressure and roughness was established. The results indicate that fracture roughness is a key factor controlling seepage behavior, influencing flow characteristics by regulating velocity distribution and flow regime transitions. The permeability of the specimens decreases with increasing JRC, and the rate of decline shows a significant difference before and after the inflection point: it declines rapidly with increasing JRC before the inflection point, but slows markedly once the inflection point is passed. Analysis based on the Forchheimer equation reveals that the relationship between the non-Darcy
β factor and JRC follows the Langevin model, with a critical roughness of approximately 7.51 for the transition from nonlinear to linear flow. As the fracture aperture decreases and the wall undulation height increases, the seepage process transitions sequentially from smooth stable flow, through undulating disturbed flow, to tortuous vortex flow. The corresponding energy dissipation shifts from a friction-dominated stage, through an inertial dissipation development stage, to a stage jointly dominated by friction and inertial dissipation. The established equivalent hydraulic aperture model characterizes the coupling effect of confining pressure and roughness on fracture seepage and can predict the leakage behavior of the coal mass in the sealing section under the influence of pressure relief drilling. The findings provide a theoretical basis for elucidating the evolution of fractures and seepage laws in the coal mass of sealing sections of gas extraction boreholes under the influence of pressure relief drilling, and offer important guidance for identifying the main factors behind borehole leakage and optimizing synergistic borehole layout schemes.