Advance Search
Determination Method of Separated Layer Displacement in Overburden Strata Above Coal Mining Face and Application[J]. COAL SCIENCE AND TECHNOLOGY, 2011, (1).
Citation: Determination Method of Separated Layer Displacement in Overburden Strata Above Coal Mining Face and Application[J]. COAL SCIENCE AND TECHNOLOGY, 2011, (1).

Determination Method of Separated Layer Displacement in Overburden Strata Above Coal Mining Face and Application

More Information
  • Available Online: April 02, 2023
  • Published Date: January 24, 2011
  • In order to quickly and accurately determine the separated layer displacement of the overburden strata above the coal mining face during the seam minin g process and to guide the implementation of the surface gas drainage borehole drilling protection project, the combination of the surface subsidence law and the combi ned key layer theory were applied to analyze the cause of the separated layer displacement of the overburden strata above the coal mining face under the mining influe nces and to establish an experience calculation method to calculate the separated layer displacement of the overburden strata above the coal mining face.With the num erical simulation, the calculation method was verified and was applied to the trial on the surface gas drainage borehole drilling project of Chengzhuang Mine, Jincheng Coal Mining Group.The results showed that the separated layer displacement size of the overburden strata above the coal mining face would be dependent on the subsi dence displacement differences between the top and low combined key layer of the separated layer interface. The distribution law of the separated layer displacement al ong the inclination direction of the coal mining face would have a high peak in the middle of the coal mining face and would have a variation law getting small from the middle of the coal mining face to the ends of the coal mining face.The borehole layout of the surface borehole drilling would be suitable to be selected in the area betwe en the subsidence turning point of the coal mining face and the coal mining face boundary.
  • Related Articles

    [1]HAN Lei, YANG Ke, WANG Tianjun, YU Xiang, PEI Chunmin, XU Qi, HE Xiang. “Four Zones” control model and application for surface subsidence of bed separation grouting mining[J]. COAL SCIENCE AND TECHNOLOGY, 2023, 51(8): 23-35. DOI: 10.13199/j.cnki.cst.2023-0561
    [2]WANG Liang, LI Jie. Development and application of new intelligent variable frequency traction winch[J]. COAL SCIENCE AND TECHNOLOGY, 2022, 50(4): 277-284.
    [3]ZHU Hongqing, HU Chao, ZHOU Quantao, GUO Jinlin, WANG Xiaokuan, YUAN Xiaole. Study on formula of mine three-phase foam fire prevention and control material optimized by response surface methodology[J]. COAL SCIENCE AND TECHNOLOGY, 2019, (4).
    [4]CHEN Hui, TIAN Zijian, LU Kui. Test study on radiation electromagnetic disturbance of frequency conversionspeed control system applied to winch in underground coal mine[J]. COAL SCIENCE AND TECHNOLOGY, 2018, (2).
    [5]Mao Jun Cao Hao Xie Miao, . Study on power balance control of head and tail electric motors applied to scraper conveyor[J]. COAL SCIENCE AND TECHNOLOGY, 2017, (2).
    [6]XING Jin-ling. Research on Power Balance Control of Belt Conveyor with Variable Frequency Drive[J]. COAL SCIENCE AND TECHNOLOGY, 2014, (7).
    [7]Design and Study on Electric Control System of Large Mine Hoist[J]. COAL SCIENCE AND TECHNOLOGY, 2013, (7).
    [8]Design on Electric and Hydraulic Control System for Hydraulic Powered Support[J]. COAL SCIENCE AND TECHNOLOGY, 2011, (4).
    [9]Design and Realization of Electric and Hydraulic Controller for Hydraulic Powered Support[J]. COAL SCIENCE AND TECHNOLOGY, 2011, (4).
    [10]Full Parameter Monitoring and Control System of Frequency Converted Haulage Unit for Electric Haulage Coal Shearer[J]. COAL SCIENCE AND TECHNOLOGY, 2011, (3).

Catalog

    Article views (1061) PDF downloads (2) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return